CLASSES & EVENTS

We’re here every step of the way to help you build your skills and pursue your passion

VACUFLO Central Vacuum Products

Experience the ultimate in whole-house cleaning convenience, indoor air quality benefits and value with VACUFLO®. The VACUFLO System works by transporting dirt, debris and dust through a simple network of tubing that runs through the walls of your home to a main power unit, usually located in a garage, basement or utility area.

VACUFLO offers the latest in hose management products and accessories for central vacuum systems. These products make cleaning with a central vacuum system even easier by providing hose-at-hand solutions for all your cleaning needs. Hide-A-Hose for entire house cleaning, Vroom for quick clean-ups in high-traffic areas such as kitchens and bathrooms and Spot for specific cleaning jobs such as lint screens and litter boxes both provide easy, convenient access to powerful vacuum suction right where you need it.

Product Info
Central Vacuum Central Vacuum >> Filtered Cyclonic

Filtered Cyclonic Power Units

VACUFLO Filtered Cyclonic Power Units utilize cyclonic separation for primary filtration and a pleated filter for secondary filtration. Unlike central vacuum systems that rely on permanent cloth filters, the powerful performance of VACUFLO will not decrease as dirt accumulates.

 

 

 

Model Recommended Home Size  (sq. ft.) Sealed Vacuum (Water Lift) CFM Max Max Air Watt* Volts Max/Avg Amps** Collection Capacity (Gallons) Level of Quietness (Decibles)***
FC300 up to 2,500 106″ 115 422 120 11.2/9.9 4 73.7 dBA
FC550 up to 5,000 125″ 121 520 120 14.0/11.3 6 64.2 dBA
FC650 up to 8,000 141″ 124 575 120 15.7/12.4 6 62.8 dBA
FC1550 Dual Motor up to 18,000 128″ 228 1010 240 13.4/11.6 6 66.0 dBA

*ASTM recognizes air watts as air power and is defined as “above the floor cleaning potential.” 
**Maximum amps refer to the potential amount of current if the power unit is running in a stand-alone situation.  (No tubing or accessories attached.)  Average amps refer to the actual amount of current used when the power unit is in typical operation (installed, with accessores attached.)
  ***ASTM draft F11.50.07 test method was used to determine dBA ratings.  Sound levels were measured at 6′ from the power unit.  All power units were exhausted outdoors.